We’ve been getting a lot of calls lately in regards to doing typical service work, dealer computer updates, and things as simple as a light bulb replacement and oil change. The answer is YES, to all of the above.
75% of our work is actually dealer style services and maintenance. We have all the special tools and equipment to take care of your BMW needs. Please don’t hesitate to email us for a quote on service or even stop in to check out our facility!
Thanks again for your support!
We use state of the art Autologic diagnostics scan tool. We have the ability to program, update, and even do performance tunes!
E60 M5 Engine rebuild
M-Car specialists
obligatory wastegate rattle fix on a 335i
Standard Cooling system overhaul
BMW E36 blown head gasket, and head repair services
Engine overhaul
exhaust installations
We’ve been working on a in-house custom M3 turbo build for quite some time now on and off. Over the last year we’ve been swamped with work and haven’t touched it until recently. Last weekend we did some final touches on the turbo setup and put her on the dyno for some tuning. Results were great overall. Even with the turbo mounted remotely, there’s actually minimal turbo lag unlike what most people think. We’re currently running a Precision 6266 ball bearing billet turbo. With the 68ar turbine we achieved full boost at about 4,800 RPM’s. Combined with the Pro-efi’s traction control program it delivers amazing power to the ground with minimal slippage. There’s more testing to be done as our air-water intake manifold was only built to withstand low boost. The final results were
525rwhp @ 7,800 RPM’s
383 rwtq @ 6,200 RPM’s
boost 14.7 PSI
93 octane
Our next plan is complete motor tear down and Forged rod upgrade and L19 head studs. We should easily achieve 800whp on race gas with this turbo.
After a little over 3 years we’re finally getting an official sign! Our good friends at Liqui moly has sponsored the new addition with a little plug involved.
Just wanted to share!
thanks again!
VR6′S ON VR6′S ON VR6′S! All the Vr6 motors we currently have in the shop!
MK1 VR6 Swapped caddy
Twin turbo R32 MK1
Our VR6 cabby mk1
Ginster MK3 GTI build
MK1 Rabbit swap rebuild
MK4 R32 motor swap
12V VR6 motor overhaul
MK1 Swallow tail VR6 swap build for sowo
Another VR6 Overhaul for a future build
MK2 GTI VR6 Supercharged build in progress
MK1 GTI VR6 Big turbo build in progress
Our service managers Built VR6 MK3 GTI Big turbo build
BUSY Friday at the shop!!!
JP in the process of removing the transmission on this BMW E30 318…. Pilot bearing is noisy!
Air struts complete on Nashs MK1 VR6 rabbit!
Mk2 golf getting some maintenance done along with some exhaust work
A/C recharge on this BMW X5
BMW 530 getting a new torque converter installed.
